Resources / Gland Calculator

O-ring gland calculator

Check squeeze, gland fill, stretch and the need for back-up rings, in inches and psi.

Typical design ranges

CheckStaticDynamicWhy it matters
Squeeze15 to 30%10 to 20%Too little leaks at low pressure; too much takes a compression set and raises friction
Gland fill75% or less75% or lessLeaves room for swell and thermal expansion
Stretch (piston glands)0 to 3%0 to 3%Stretch thins the cross-section and shortens life
Extrusion gapDepends on pressure and hardnessDepends on pressure and hardnessToo large a gap nibbles the O-ring; back-up rings close it

These are general screening ranges used across the industry. Your application may justify different values; we check every gland on the quote.

Send the gland with your RFQ.

Include the drawing or the dimensions above. We confirm squeeze, fill and extrusion before quoting.

Scroll to Top