Materials / FKM
Fluorocarbon rubber (FKM)
High-temperature hydrocarbon service and CO2, where amines and steam are not present.
Key properties
| Property | Value |
|---|---|
| ASTM D1418 designation | FKM |
| Typical temperature range (°F) | -15 to +400 (low-temperature grades to about -40) |
| Hardness available (Shore A) | 75, 90 |
| RGD-rated grades | RGD-rated grades are available. |
| Relative cost | Moderate to high |
| Typical oilfield uses | High-temperature hydrocarbon service, gas service with CO2, chemical service without amines. |
Values are typical and vary by compound. We confirm against the actual compound datasheet on every quote.
Works well with
- Hydrocarbons, including aromatics
- CO2 and acid gases
- Acids
- High-temperature oils
Avoid or check carefully
- Amine corrosion inhibitors
- Steam and hot water
- Methanol (standard grades)
- Ketones
- Low temperature (standard grades)
Specify FKM for your application
Send the size or drawing and the service conditions. We confirm the compound and a quote date when your request arrives.