Design
The narrow stem of the elastomer T seals against the sliding surface, while the two back-up rings on either side of it prevent extrusion. Because the wide base locks the seal in the groove, a T-seal cannot roll or twist the way an O-ring can.
T-seals are normally installed in grooves designed for an O-ring with two back-up rings, so they can upgrade an existing O-ring gland without re-machining.
Features
- No spiral failure or rolling in reciprocating service
- Two back-up rings for extrusion resistance
- Fits O-ring grooves sized for two back-up rings
- Rod and piston versions
- Elastomer in NBR, HNBR or FKM; back-up rings in nylon, PTFE or PEEK
Technical data
| Type | Rod or piston seal, reciprocating or static |
| Temperature | -40 °F to +400 °F, depending on elastomer and back-up material |
| Pressure | Up to about 5,000 psi typical; higher with PEEK back-up rings, depending on gap |
| Speed, reciprocating | Up to about 1.6 ft/s |
| Elastomer | NBR, HNBR, FKM |
| Back-up rings | Nylon, PTFE, glass-filled PTFE, PEEK |
| Grooves | O-ring grooves sized for two back-up rings, or to drawing |
Typical values. Actual limits depend on compound, gland design and service conditions; we confirm them on every quote.
Materials
| Component | Material | Typical range (°F) |
|---|---|---|
| Elastomer T | NBR | -30 to +250 |
| Elastomer T | HNBR | -25 to +300 |
| Elastomer T | FKM | -15 to +400 |
| Back-up rings | Nylon | Up to about +250 |
| Back-up rings | PTFE, glass-filled PTFE | Up to +500 |
| Back-up rings | PEEK | Up to about +480 |
Sizes and standards
- Sized to the matching AS568 groove (dash number)
- Rod and piston versions
- Custom sizes to groove drawing
Ordering information
Include the following in your RFQ:
- Rod or piston; rod, bore and groove dimensions, or the matching O-ring dash size
- Elastomer and back-up ring material
- Pressure (psi), temperature (°F), fluid and stroke speed
- Quantity and required date
Applications
Downhole tools
Packers, setting tools and sliding sleeves
Hydraulic cylinders
Rod and piston seals that resist spiral failure
Valve actuators
Reciprocating seals in compact grooves
Pumps
Plunger and piston service
Need T-Seals?
Send the size or drawing, the service conditions and the quantity. We confirm a quote date when your request arrives.
