Home / Industries
Industries
Sealing products by industry
Where our O-rings, T-seals, graphite packing and gaskets are used in oil & gas.
Wellhead & valves
API 6A wellheads, trees and gate valves need seals that hold pressure for years, often with H2S and CO2 in the stream.
Typical choices: HNBR and FKM O-rings in RGD-rated grades, PEEK back-up rings at high pressure, graphite stem packing for high-temperature valves.
Products used
| O-Rings | Static & dynamic · -40 to +600 °F by compound |
| Back-up Rings | For O-rings and T-seals |
| Graphite Packing & Rings | Up to +850 °F in air · pH 0 to 14 |
| Graphite & Spiral Wound Gaskets | ASME B16.20 & B16.21 · Class 150 to 2500 |
Well service & frac
Frac, cementing and coiled-tubing equipment cycles hard and cannot wait for parts.
Typical choices: O-rings and T-seals for pump and valve service; bonded seals for fittings and plugs.
Products used
| O-Rings | Static & dynamic · -40 to +600 °F by compound |
| T-Seals | Rod & piston · fits O-ring grooves |
| Bonded Seals | UNF, BSP and metric threads |
Downhole tools
Packers, sliding sleeves and completion tools need compact seals that survive temperature, pressure and wellbore chemistry.
Typical choices: FKM, FEPM and FFKM O-rings, PEEK back-up rings, and T-seals for reciprocating tool seals.
Products used
| O-Rings | Static & dynamic · -40 to +600 °F by compound |
| Back-up Rings | For O-rings and T-seals |
| T-Seals | Rod & piston · fits O-ring grooves |
Refining & process
Refinery and process valves run hot, often in hydrocarbon or steam service where elastomers fail.
Typical choices: Die-formed graphite packing sets and spiral wound gaskets with graphite filler.
Products used
| Graphite Packing & Rings | Up to +850 °F in air · pH 0 to 14 |
| Graphite & Spiral Wound Gaskets | ASME B16.20 & B16.21 · Class 150 to 2500 |
Pipelines & flanges
Flanged pipelines, manifolds and closures need gaskets matched to the flange standard and pressure class.
Typical choices: Spiral wound gaskets to ASME B16.20 and O-rings for closures and connectors.
Products used
| Graphite & Spiral Wound Gaskets | ASME B16.20 & B16.21 · Class 150 to 2500 |
| O-Rings | Static & dynamic · -40 to +600 °F by compound |
Hydraulics & rig equipment
Rig hydraulics, power units and cylinders need simple, reliable static and dynamic seals.
Typical choices: Bonded seals for ports and plugs, O-rings and T-seals for cylinders and valves.
Products used
| Bonded Seals | UNF, BSP and metric threads |
| O-Rings | Static & dynamic · -40 to +600 °F by compound |
| T-Seals | Rod & piston · fits O-ring grooves |
Tell us about your equipment
We recommend the seal, material and size, and confirm a quote date when your RFQ arrives.