Home / Products / Graphite Packing & Rings

Graphite sealing

Graphite Packing & Rings

Flexible graphite packing for valve stems, pumps and agitators: die-formed rings to seal, braided end rings to stop extrusion. Supplied as cut rings, coils or complete sets.

Die-formed graphite rings and braided graphite packing
Die-formed graphite rings and braided graphite packing

Design

Die-formed rings are compressed from expanded (flexible) graphite tape to a set density. Under gland load they conform to the stem and stuffing box, and they keep sealing at temperatures where elastomers fail.

Braided graphite packing is woven from graphite yarn, often reinforced with Inconel wire or carbon fiber. As end rings it stops the softer die-formed rings extruding through the stem clearance; used alone, it packs pumps and lower-pressure valves.

Features

  • Die-formed rings to your stem and bore sizes
  • Braided packing in coils or cut rings, 1/8 in to 1 in square
  • Wire- or carbon-reinforced grades for higher pressure
  • Graphite purity 98% carbon minimum; low-chloride grades
  • Suits high-temperature and fire-safe valve designs
StemGland follower
Cross-section: Valve packing set: braided end rings and die-formed graphite rings

Technical data

TypeCompression packing for valves, pumps and agitators
TemperatureUp to +850 °F in air; up to +1,200 °F in steam
Chemical rangepH 0 to 14, except strong oxidizers
PressureValve stem sets typically to about 4,000 psi with braided end rings; depends on gland design
Graphite purity98% carbon minimum; higher purity on request
FormsDie-formed rings, braided coils, cut rings, complete sets
Typical values. Actual limits depend on compound, gland design and service conditions; we confirm them on every quote.

Materials

ProductConstructionTypical use
Die-formed ringExpanded graphite tape, compressed to densityValve stem sealing rings
Braided graphite packingGraphite yarn, braidedPumps, valves, end rings
Reinforced braided packingGraphite yarn with Inconel wire or carbon fiberAnti-extrusion end rings, higher pressure

Valves that must meet a fugitive-emission standard such as API 622 or ISO 15848-1 need packing qualified to that standard. Tell us on your RFQ and we will only quote qualified products.

Sizes and standards

  • Die-formed rings to stem diameter × stuffing box bore × ring height, in inches
  • Braided packing 1/8 in to 1 in square, in coils or cut rings
  • Complete valve packing sets to drawing

Ordering information

Include the following in your RFQ:

  • Stem diameter, stuffing box bore and depth
  • Number of rings and set arrangement
  • Temperature (°F), pressure (psi) and media
  • Any emission standard the valve must meet
  • Quantity and required date

Applications

Valve stems

Gate, globe and ball valves

Refinery & process

High-temperature hydrocarbon and steam valves

Pumps & agitators

Braided packing for rotating shafts

Steam service

Valves and expansion joints

Need Graphite Packing and Rings?

Send the size or drawing, the service conditions and the quantity. We confirm a quote date when your request arrives.

Scroll to Top