Design
A back-up ring sits on the low-pressure side of the O-ring and bridges the extrusion gap, so the elastomer cannot be forced into it. Where pressure acts from both directions, fit one on each side.
Spiral (split) rings fit closed grooves easily; scarf-cut rings suit most radial glands; solid rings give the best extrusion resistance but need an open or split groove.
Features
- Spiral, scarf-cut and solid designs
- Virgin PTFE, glass-filled PTFE and PEEK
- Sized to match AS568 and ISO 3601 O-rings
- Contoured (concave) versions on request
- Supplied loose or kitted with O-rings
Technical data
| Type | Anti-extrusion ring for O-rings and T-seals |
| Materials | Virgin PTFE, glass-filled PTFE, PEEK |
| Temperature | PTFE -320 °F to +500 °F; PEEK up to about +480 °F |
| When to use | Above about 1,500 psi, or lower with a large gap |
| Designs | Spiral (split), scarf-cut, solid |
| Sizes | To match AS568 and ISO 3601 O-rings, or to drawing |
Typical values. Actual limits depend on compound, gland design and service conditions; we confirm them on every quote.
Materials
| Material | Max temperature (°F) | Notes |
|---|---|---|
| Virgin PTFE | +500 | Low friction, near-universal chemical resistance; can creep under sustained load |
| Glass-filled PTFE | +500 | Better extrusion and creep resistance than virgin PTFE |
| PEEK | About +480 | Highest strength and stiffness for high-pressure, high-temperature service |
Sizes and standards
- Matched to AS568 dash sizes
- Matched to ISO 3601 metric sizes
- Custom sizes to groove drawing
Ordering information
Include the following in your RFQ:
- Matching O-ring size, or groove dimensions
- Rod or piston groove, single or double-sided pressure
- Material and design (spiral, scarf-cut or solid)
- Quantity and required date
Applications
Wellhead & valves
High-pressure bonnet and stem seals
Downhole tools
O-ring and T-seal glands at high pressure
Hydraulics
High-pressure cylinders and valves
Need Back-up Rings?
Send the size or drawing, the service conditions and the quantity. We confirm a quote date when your request arrives.
