Materials / FEPM (AFLAS)
Tetrafluoroethylene-propylene (FEPM)
The answer when amines, steam or high-pH fluids rule out FKM. AFLAS is a trademark of AGC Inc.
Key properties
| Property | Value |
|---|---|
| ASTM D1418 designation | FEPM |
| Typical temperature range (°F) | +15 to +450 (grade dependent) |
| Hardness available (Shore A) | 80, 90 |
| RGD-rated grades | Limited range of RGD-rated grades; confirm by test report. |
| Relative cost | High |
| Typical oilfield uses | Downhole service with amine inhibitors, steam injection and sour wells. |
Values are typical and vary by compound. We confirm against the actual compound datasheet on every quote.
Works well with
- Amine corrosion inhibitors
- Steam and hot water
- H2S
- Bases, brines and high-pH completion fluids
Avoid or check carefully
- Aromatic hydrocarbons (swelling)
- Ketones and chlorinated solvents
- Low-temperature sealing
Specify FEPM (AFLAS) for your application
Send the size or drawing and the service conditions. We confirm the compound and a quote date when your request arrives.