Home / Products / Graphite Packing & Rings
Graphite sealing
Graphite Packing & Rings
Flexible graphite packing for valve stems, pumps and agitators: die-formed rings to seal, braided end rings to stop extrusion. Supplied as cut rings, coils or complete sets.

Design
Die-formed rings are compressed from expanded (flexible) graphite tape to a set density. Under gland load they conform to the stem and stuffing box, and they keep sealing at temperatures where elastomers fail.
Braided graphite packing is woven from graphite yarn, often reinforced with Inconel wire or carbon fiber. As end rings it stops the softer die-formed rings extruding through the stem clearance; used alone, it packs pumps and lower-pressure valves.
Features
- Die-formed rings to your stem and bore sizes
- Braided packing in coils or cut rings, 1/8 in to 1 in square
- Wire- or carbon-reinforced grades for higher pressure
- Graphite purity 98% carbon minimum; low-chloride grades
- Suits high-temperature and fire-safe valve designs
Technical data
| Type | Compression packing for valves, pumps and agitators |
| Temperature | Up to +850 °F in air; up to +1,200 °F in steam |
| Chemical range | pH 0 to 14, except strong oxidizers |
| Pressure | Valve stem sets typically to about 4,000 psi with braided end rings; depends on gland design |
| Graphite purity | 98% carbon minimum; higher purity on request |
| Forms | Die-formed rings, braided coils, cut rings, complete sets |
Materials
| Product | Construction | Typical use |
|---|---|---|
| Die-formed ring | Expanded graphite tape, compressed to density | Valve stem sealing rings |
| Braided graphite packing | Graphite yarn, braided | Pumps, valves, end rings |
| Reinforced braided packing | Graphite yarn with Inconel wire or carbon fiber | Anti-extrusion end rings, higher pressure |
Valves that must meet a fugitive-emission standard such as API 622 or ISO 15848-1 need packing qualified to that standard. Tell us on your RFQ and we will only quote qualified products.
Sizes and standards
- Die-formed rings to stem diameter × stuffing box bore × ring height, in inches
- Braided packing 1/8 in to 1 in square, in coils or cut rings
- Complete valve packing sets to drawing
Ordering information
Include the following in your RFQ:
- Stem diameter, stuffing box bore and depth
- Number of rings and set arrangement
- Temperature (°F), pressure (psi) and media
- Any emission standard the valve must meet
- Quantity and required date
Applications
Valve stems
Gate, globe and ball valves
Refinery & process
High-temperature hydrocarbon and steam valves
Pumps & agitators
Braided packing for rotating shafts
Steam service
Valves and expansion joints
Need Graphite Packing and Rings?
Send the size or drawing, the service conditions and the quantity. We confirm a quote date when your request arrives.